Video tutorial – how to assemble the home oven base

ONE

5 MINUTI

BRIO

M6 bolt and nut.

Hole caps

Socket screw and M6 nut

10, 13, 17 spanners

4 (5/32 in) Allen key

Handle and M8 fixing bolt

Top and legs

M10 bolt and washer

Castors with fixing plate

Open the packaging and put the top on the ground.

Mount the first table leg.

Tighten the socket screw and the nut to secure the leg to the top. All Alfa products come with the tools needed to assemble.

Repeat the same process with the other legs.

Continue with the assembly of the third leg.

Then complete the installation of the legs.

Now attach the 4 castors.

Place the fixing plate and secure the 4 castors by using the bolts and nuts.

With the top inverted install the front panel.

Anchor the panel to the base by using the slots.

Attach the handle on the right or on the left.

Cover with the hole caps to round off the edges.

Ideal for gas-fired ovens. The front panel allows you to hide the gas bottle.

Better for wood-fired ovens. Move the front panel to the rear to make room for storing firewood.

WARNINGS

Read and follow the instructions for a proper assembly: if you have any questions, send an email to [email protected].
Do not move the oven when it is in operation.
Place the oven base on a perfectly level surface.
Do not mount the oven on the base when it is on or still hot.
The gas bottle may leave traces of rust on the base.
Maximum gas bottle capacity: 25 kg.
Maximum shelf load capacity: 30 kg.
Alfa is not responsible for any damage to property or people due to accidents caused by incorrect handling or use of the base.

CAUTION